Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Speed sensors
- Nine shaft options
- Five mounting styles
- Low-speed spool
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.19 in |
| Torque | 233 Nm |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Port Code | C |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Material | Cast Iron |
| RPM [Min] | 353 rpm |
| Displacement | 159 cm3/Rev |
| Flow Rate | 57 lpm |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1650 psi |
| Splines | 0 |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Special Features | None |
| Intermittent Pressure [Max] | 155 bar |
| Mounting Type Code | A |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 9.7 |
| Paint | Primer Low Gloss Black |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 3.25 in |
| Output Shaft Code | 01 |
| Port Type | Manifold, O-Ring |
| Series | H Series |
| Motor Element | Gerotor |
| Paint Code | A |
| RPM [Max] | 353 rpm |
| Mounting Hole Size | 0.54 in |
| Weight | 13.3 LB |
