Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Spline Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Motor Element | Gerotor |
| RPM [Min] | 192 rpm |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Special Features | None |
| Shaft Type | Splined |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Series | H Series |
| Paint Code | A |
| Port Type | Manifold, O-Ring |
| Flange Orientation | Standard |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| RPM [Max] | 192 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Flow Rate | 57 lpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 17.9 |
| Pressure [Max] | 1350 psi |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Output Shaft Code | 02 |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Code | C |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain | None |
| Displacement | 294 cm3/Rev |
| Paint | Primer Low Gloss Black |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Intermittent Pressure [Max] | 124 bar |
| Torque | 351 Nm |
| Mounting Type Code | B |
| Mount Type | 4 Bolt |
| Weight | 13.85 LB |
