Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Pilot Diameter | 3.25 in |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 0 |
| Port Code | A |
| RPM [Min] | 585 rpm |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Splines | 6 |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Displacement | 96 cm3/Rev |
| Paint Code | A |
| RPM [Max] | 585 rpm |
| Corrosion Resistant | No |
| Shaft Type | Splined |
| Motor Element | Gerotor |
| Paint | Primer Low Gloss Black |
| Rotation | Standard Rotation |
| Series | H Series |
| Port Type | SAE O-Ring |
| Mount Type | 2 Bolt |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Output Shaft Code | 02 |
| Torque | 155 Nm |
| Pressure [Max] | 1800 psi |
| Port Size | 7/8-14 |
| Port Location | Side Port |
| Mounting Hole Size | 0.54 in |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Intermittent Pressure [Max] | 165 bar |
| Shaft Size & Type | 1 in - 6T Spline |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | A |
| Displacement (in³/rev) | 5.9 |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Weight | 11.8 LB |
