Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 353 rpm |
| Splines | 6 |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 353 rpm |
| Special Features Assembly Code | 0 |
| Paint | Primer Low Gloss Black |
| Case Drain Code | 0 |
| Paint Code | A |
| Port Size | 7/8-14 |
| Displacement (in³/rev) | 9.7 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Shaft Type | Splined |
| Series | H Series |
| Torque | 233 Nm |
| Port Size & Location | SAE-10 Side |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in - 6T Spline |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Displacement | 159 cm3/Rev |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Port Code | A |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Special Features | None |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Motor Element | Gerotor |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Intermittent Pressure [Max] | 155 bar |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 02 |
| Pressure [Max] | 1650 psi |
| Mounting Hole Size | 0.54 in |
| Weight | 12.5 LB |
