Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Spline Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Special Features Hardware Code | 00 |
| Case Drain | None |
| Pressure [Max] | 1800 psi |
| Port Code | C |
| RPM [Min] | 969 rpm |
| Duty | Standard-Duty |
| RPM [Max] | 969 rpm |
| Mount Type | 2 Bolt |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Splines | 6 |
| Mounting Type Code | A |
| Displacement (in³/rev) | 2.81 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Shaft Type | Splined |
| Port Location | Side Port |
| Special Features | None |
| Corrosion Resistant | No |
| Output Shaft Code | 02 |
| Flow [Max] | 12 gal/min |
| Flow Rate | 45 lpm |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Displacement | 46 cm3/Rev |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Mounting Hole Size | 0.54 in |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Series | H Series |
| Material | Cast Iron |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | Manifold, O-Ring |
| Torque | 73 Nm |
| Paint | Primer Low Gloss Black |
| Intermittent Pressure [Max] | 165 bar |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Weight | 11.2 LB |
