Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Spline Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Displacement | 96 cm3/Rev |
| Output Shaft Type | Spline |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Mount Type | 2 Bolt |
| Seal Options | Standard |
| Output Shaft Code | 02 |
| Torque | 155 Nm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Intermittent Pressure [Max] | 165 bar |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Paint Code | A |
| RPM [Max] | 585 rpm |
| Duty | Standard-Duty |
| Port Type | Manifold, O-Ring |
| Displacement (in³/rev) | 5.9 |
| Recommended System Working Temperature [Max] | 180 °F |
| Pressure [Max] | 1800 psi |
| Brake Type | Hydraulic |
| Front Seal Kit If Available | 60540-000 |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Splined |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | 00 |
| Paint | Primer Low Gloss Black |
| Port Code | C |
| Shaft Size & Type | 1 in - 6T Spline |
| Mounting Type Code | A |
| Mounting Hole Size | 0.54 in |
| Mounting Holes | 0.535 in |
| Flange Orientation | Standard |
| Flow Rate | 57 lpm |
| Flow [Max] | 15 gal/min |
| Recommended System Working Temperature [Min] | -30 °F |
| Case Drain Code | 0 |
| Design Code | 9 |
| RPM [Min] | 585 rpm |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Motor Type | Spool Valve |
| Case Drain | None |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Series | H Series |
| Port Size & Location | Manifold, 5/16-18 Side |
| Splines | 6 |
| Weight | 11.8 LB |
