Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Paint | Primer Low Gloss Black |
| Port Location | Side Port |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Type | NPTF |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Brake Type | Hydraulic |
| Seal Options | Standard |
| Paint Code | A |
| Case Drain Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Flange Orientation | Flange Rotated 90° |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| RPM [Max] | 192 rpm |
| Output Shaft Type | Straight |
| Special Features | Flange Rotated 90° |
| Mounting Holes | 0.535 in |
| RPM [Min] | 192 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 17.9 |
| Intermittent Pressure [Max] | 124 bar |
| Torque | 351 Nm |
| Output Shaft Code | 01 |
| Design Code | 9 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.54 in |
| Series | H Series |
| Port Code | B |
| Displacement | 294 cm3/Rev |
| Rotation | Flange |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Recommended System Working Temperature [Max] | 180 °F |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Pressure [Max] | 1350 psi |
| Flow Rate | 57 lpm |
| Front Seal Kit If Available | 60540-000 |
| Port Size | 1/2-14 |
| Corrosion Resistant | No |
| Special Features Assembly Code | 2 |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 14.245 LB |
