Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| RPM [Max] | 585 rpm |
| Port Type | NPTF |
| Bolt Circle Dia. | 3 1/4 in |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Cross Hole |
| Mount Type | 4 Bolt |
| Displacement | 96 cm3/Rev |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Case Drain | None |
| Paint | Primer Low Gloss Black |
| RPM [Min] | 585 rpm |
| Intermittent Pressure [Max] | 165 bar |
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Mounting Holes | 3/8-16 |
| Mounting Type Code | B |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 07 |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 5.9 |
| Flange Orientation | Standard |
| Port Size | 1/2-14 |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Shaft Size & Type | Straight |
| Flow Rate | 57 lpm |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Port Code | B |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Torque | 155 Nm |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Splines | 0 |
| Pilot Diameter | 1.75 in |
| Weight | 11.8 LB |
