Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- G 1/2 Prort Size
- BSP Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1600 psi |
| Port Type | BSP |
| Special Features Assembly Code | 0 |
| Corrosion Resistant | No |
| Special Features | None |
| Paint | Primer Low Gloss Black |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 304 rpm |
| Torque | 265 Nm |
| Shaft Size & Type | Straight |
| Special Features Hardware Code | 00 |
| Splines | 0 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Rotation | Standard Rotation |
| Shaft Type | Straight |
| Case Drain Code | 2 |
| Displacement | 185 cm3/Rev |
| Port Code | E |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Material | Cast Iron |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Mounting Hole Size | 0.54 in |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 24 |
| Displacement (in³/rev) | 11.3 |
| Intermittent Pressure [Max] | 148 bar |
| Seal Material | Buna-N |
| Paint Code | A |
| Port Size | G 1/2 |
| Flow Rate | 57 lpm |
| RPM [Max] | 304 rpm |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Weight | 13.0 LB |
