Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Port Type | NPTF |
| Material | Cast Iron |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Motor Element | Gerotor |
| Port Size | 1/2-14 |
| Torque | 407 Nm |
| Rotation | Standard Rotation |
| Displacement | 370 cm3/Rev |
| RPM [Min] | 152 rpm |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Intermittent Pressure [Max] | 103 bar |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Special Features | None |
| Case Drain Code | 1 |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Port Location | Side Port |
| RPM [Max] | 152 rpm |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 0.54 in |
| Splines | 0 |
| Port Code | B |
| Bolt Circle Dia. | 4.187 in |
| Displacement (in³/rev) | 22.58 |
| Flow [Max] | 15 gal/min |
| Paint | Primer Low Gloss Black |
| Pressure [Max] | 1250 psi |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow Rate | 57 lpm |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Weight | 13.0 LB |
