Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Mounting Type Code | A |
| Mounting Hole Size | 0.54 in |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Port Size & Location | SAE-10 Side |
| Torque | 233 Nm |
| Mounting Holes | 0.535 in |
| Port Code | A |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 9.7 |
| Special Features | None |
| RPM [Min] | 353 rpm |
| Duty | Standard-Duty |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Paint Code | A |
| Rotation | Standard Rotation |
| Paint | Primer Low Gloss Black |
| Case Drain Code | 1 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Woodruff Key |
| Series | H Series |
| Flow Rate | 57 lpm |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Port Size | 7/8-14 |
| Pressure [Max] | 1650 psi |
| Material | Cast Iron |
| Splines | 0 |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Displacement | 159 cm3/Rev |
| Intermittent Pressure [Max] | 155 bar |
| RPM [Max] | 353 rpm |
| Output Shaft Code | 01 |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Weight | 13.0 LB |
