Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Special Features | Free Running Gerotor |
| Series | H Series |
| Geroter/Geroler Options | Free Running |
| Case Drain | None |
| Motor Type | Spool Valve |
| Port Code | A |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.54 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Paint | Primer Low Gloss Black |
| Splines | 0 |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Viscosity Recommendation | 455 Saybold Universal Second |
| Output Shaft Code | 01 |
| Output Shaft Type | Straight |
| Recommended System Working Temperature [Max] | 180 °F |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Port Type | SAE O-Ring |
| Displacement | 36 cm3/Rev |
| Design Code | 9 |
| Port Size & Location | SAE-10 Side |
| Special Features Assembly Code | 0 |
| Torque | 41.44 Nm |
| Intermittent Pressure [Max] | 165 bar |
| Front Seal Kit If Available | 60540-000 |
| Rotation | Standard Rotation |
| Flow Rate | 38.65 lpm |
| Flow [Max] | 10 gal/min |
| Pressure [Max] | 1800 psi |
| Displacement (in³/rev) | 2.2 |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Recommended System Working Temperature [Min] | -30 °F |
| RPM [Max] | 1021 rpm |
| Paint Code | A |
| Mounting Type Code | A |
| Special Features Hardware Code | AA |
| Brake Type | Hydraulic |
| Port Location | Side Port |
| RPM [Min] | 1021 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Seal Options | Standard |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 4.187 in |
| Port Size | 7/8-14 |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Geroler Options | Free Running |
| Weight | 11.55 LB |
