Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Flow Rate | 57 lpm |
| Mounting Type Code | A |
| Port Code | A |
| Mounting Hole Size | 0.54 in |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| RPM [Min] | 469 rpm |
| Port Location | Side Port |
| RPM [Max] | 469 rpm |
| Motor Type | Spool Valve |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 7.3 |
| Recommended System Working Temperature [Max] | 180 °F |
| Port Size | 7/8-14 |
| Front Seal Kit If Available | 60540-000 |
| Paint | Primer Low Gloss Black |
| Series | H Series |
| Seal Options | Standard |
| Recommended System Working Temperature [Min] | -30 °F |
| Seal Material | Buna-N |
| Output Shaft Type | Straight |
| Paint Code | A |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1800 psi |
| Displacement | 120 cm3/Rev |
| Inlet Pressure [Max] | 2500 psi |
| Torque | 192 Nm |
| Mount Type | 2 Bolt |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Intermittent Pressure [Max] | 165 bar |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Case Drain | None |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain Code | 0 |
| Design Code | 9 |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Special Features Hardware Code | 00 |
| Bolt Circle Dia. | 4.19 in |
| Brake Type | Hydraulic |
| Duty | Standard-Duty |
| Splines | 0 |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Weight | 12.1 LB |
