Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Bolt Circle Dia. | 4.19 in |
| Recommended System Working Temperature [Max] | 180 °F |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| RPM [Max] | 385 rpm |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Flow Rate | 57 lpm |
| Intermittent Pressure [Max] | 159 bar |
| Series | H Series |
| Brake Type | Hydraulic |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Port Size | 7/8-14 |
| Material | Cast Iron |
| Displacement (in³/rev) | 8.9 |
| Mounting Hole Size | 0.54 in |
| Viscosity Recommendation | 100 Saybold Universal Second |
| RPM [Min] | 385 rpm |
| Port Code | A |
| Design Code | 9 |
| Output Shaft Type | Straight |
| Seal Options | Standard |
| Pressure [Max] | 1700 psi |
| Corrosion Resistant | No |
| Paint Code | A |
| Front Seal Kit If Available | 60540-000 |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Case Drain | None |
| Paint | Primer Low Gloss Black |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mount Type | 2 Bolt |
| Displacement | 146 cm3/Rev |
| Recommended System Working Temperature [Min] | -30 °F |
| Inlet Pressure [Max] | 2500 psi |
| Torque | 221 Nm |
| Splines | 0 |
| Port Type | SAE O-Ring |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Weight | 12.4 LB |
