Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| RPM [Max] | 469 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Output Shaft Type | Straight |
| Design Code | 9 |
| Series | H Series |
| Mount Type | 2 Bolt |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Intermittent Pressure [Max] | 165 bar |
| Recommended System Working Temperature [Max] | 180 °F |
| Displacement | 120 cm3/Rev |
| Mounting Type Code | A |
| Torque | 192 Nm |
| Pilot Diameter | 3.25 in |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Recommended System Working Temperature [Min] | -30 °F |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Port Location | Side Port |
| Port Code | B |
| Flow Rate | 57 lpm |
| Brake Type | Hydraulic |
| Port Type | NPTF |
| Displacement (in³/rev) | 7.3 |
| Port Size | 1/2-14 |
| Flange Orientation | Standard |
| Seal Options | Standard |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Mounting Hole Size | 0.54 in |
| Special Features Hardware Code | 00 |
| Paint | Primer Low Gloss Black |
| Front Seal Kit If Available | 60540-000 |
| Pressure [Max] | 1800 psi |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| RPM [Min] | 469 rpm |
| Duty | Standard-Duty |
| Weight | 12.1 LB |
