Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Bolt Circle Dia. | 3 1/4 in |
| Intermittent Pressure [Max] | 165 bar |
| RPM [Min] | 469 rpm |
| Duty | Standard-Duty |
| Paint Code | A |
| Seal Options | Standard |
| Front Seal Kit If Available | 60540-000 |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Design Code | 9 |
| Case Drain Code | 0 |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 7.3 |
| Motor Element | Gerotor |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Displacement | 120 cm3/Rev |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Recommended System Working Temperature [Min] | -30 °F |
| Splines | 0 |
| Mounting Type Code | B |
| Material | Cast Iron |
| Brake Type | Hydraulic |
| Port Code | A |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 1.75 in |
| Inlet Pressure [Max] | 2500 psi |
| Paint | Primer Low Gloss Black |
| Recommended System Working Temperature [Max] | 180 °F |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Output Shaft Type | Straight |
| Flange Orientation | Standard |
| Port Size | 7/8-14 |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Size & Location | SAE-10 Side |
| Pressure [Max] | 1800 psi |
| RPM [Max] | 469 rpm |
| Mounting Holes | 3/8-16 |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | SAE O-Ring |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Flow Rate | 57 lpm |
| Series | H Series |
| Mount Type | 4 Bolt |
| Torque | 192 Nm |
| Weight | 11.75 LB |
