Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 8.9 |
| Special Features Assembly Code | 0 |
| Recommended System Working Temperature [Max] | 180 °F |
| Pressure [Max] | 1700 psi |
| Port Size & Location | SAE-10 Side |
| Front Seal Kit If Available | 60540-000 |
| Brake Type | Hydraulic |
| Intermittent Pressure [Max] | 159 bar |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | B |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Design Code | 9 |
| Torque | 221 Nm |
| Port Size | 7/8-14 |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Paint Code | A |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Paint | Primer Low Gloss Black |
| Case Drain Code | 0 |
| Recommended System Working Temperature [Min] | -30 °F |
| Splines | 0 |
| Output Shaft Code | 01 |
| Port Code | A |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Mount Type | 4 Bolt |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Displacement | 146 cm3/Rev |
| Motor Element | Gerotor |
| Pilot Diameter | 1.75 in |
| RPM [Min] | 385 rpm |
| RPM [Max] | 385 rpm |
| Case Drain | None |
| Port Location | Side Port |
| Seal Options | Standard |
| Port Type | SAE O-Ring |
| Output Shaft Type | Straight |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Weight | 12.0 LB |
