Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Bolt Circle Dia. | 3 1/4 in |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Splines | 0 |
| Paint | Primer Low Gloss Black |
| Recommended System Working Temperature [Max] | 180 °F |
| Torque | 221 Nm |
| Seal Options | Standard |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Case Drain | None |
| RPM [Min] | 385 rpm |
| Mounting Type Code | B |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Mount Type | 4 Bolt |
| Brake Type | Hydraulic |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Output Shaft Code | 01 |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 8.9 |
| Flow Rate | 57 lpm |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Port Code | B |
| Series | H Series |
| Recommended System Working Temperature [Min] | -30 °F |
| Pressure [Max] | 1700 psi |
| Port Size | 1/2-14 |
| Design Code | 9 |
| Port Type | NPTF |
| Output Shaft Type | Straight |
| Intermittent Pressure [Max] | 159 bar |
| RPM [Max] | 385 rpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Displacement | 146 cm3/Rev |
| Front Seal Kit If Available | 60540-000 |
| Port Location | Side Port |
| Weight | 12.05 LB |
