Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Shaft Size & Type | Straight |
| RPM [Min] | 1021 rpm |
| Intermittent Pressure [Max] | 165 bar |
| Port Code | A |
| Port Size | 7/8-14 |
| Port Location | Side Port |
| Flow Rate | 38 lpm |
| Series | H Series |
| Port Size & Location | SAE-10 Side |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 1.75 in |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features | Free Running Gerotor |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Port Type | SAE O-Ring |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Cross Hole |
| Output Shaft Code | 07 |
| Mounting Holes | 3/8-16 |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.2 |
| Case Drain | None |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Paint | Primer Low Gloss Black |
| Mounting Type Code | B |
| Torque | 56 Nm |
| Splines | 0 |
| Corrosion Resistant | No |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Duty | Standard-Duty |
| Mount Type | 4 Bolt |
| RPM [Max] | 1021 rpm |
| Displacement | 36 cm3/Rev |
| Pressure [Max] | 1800 psi |
| Flow [Max] | 10 gal/min |
| Special Features Hardware Code | AA |
| Weight | 11.2 LB |
