Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 57 lpm |
| Rotation | Flange |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Special Features Assembly Code | 2 |
| Mount Type | 2 Bolt |
| Torque | 118 Nm |
| Displacement (in³/rev) | 4.5 |
| RPM [Min] | 760 rpm |
| Output Shaft Code | 01 |
| Port Type | SAE O-Ring |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Port Size | 7/8-14 |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Port Code | A |
| Special Features | Flange Rotated 90° |
| Flange Orientation | Flange Rotated 90° |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Paint | Primer Low Gloss Black |
| Intermittent Pressure [Max] | 165 bar |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.54 in |
| Seal Material | Buna-N |
| RPM [Max] | 760 rpm |
| Mounting Type Code | A |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Mounting Holes | 0.535 in |
| Displacement | 74 cm3/Rev |
| Paint Code | A |
| Weight | 13.0 LB |
