Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Seal Options Code | 00 |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Motor Element | Gerotor |
| Material | Cast Iron |
| RPM [Max] | 585 rpm |
| Shaft Options Code | 0 |
| Torque | 155 Nm |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 3/8-16 |
| Case Drain | None |
| Splines | 0 |
| Displacement (in³/rev) | 5.9 |
| Front Seal Kit If Available | 60540-000 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Pilot Diameter | 1.75 in |
| Port Size | 7/8-14 |
| Manifold Options Code | 0 |
| Intermittent Pressure [Max] | 165 bar |
| Brake Type | Hydraulic |
| Paint/Packaging | Nickel Plate Entire Motor, Individual Box |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Type Code | BA |
| Displacement | 96 cm3/Rev |
| RPM [Min] | 585 rpm |
| Flow [Max] | 15 gal/min |
| Seal Options | Standard |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Mount Type | 4 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Recommended System Working Temperature [Max] | 180 °F |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Output Shaft Type | Straight |
| Port Type | SAE O-Ring |
| Port Size & Location | 1/2 in NPTF Side |
| Paint | Nickel Plate Entire Motor |
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Recommended System Working Temperature [Min] | -30 °F |
| Geroter/Geroler Options Code | 0 |
| Design Code | 9 |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 57 lpm |
| Output Shaft Code | 01 |
| Speed Sensor Options Code | 0 |
| Port Code | AB |
| Motor Type | Spool Valve |
| Paint Code | Y |
| Case Drain Code | 0 |
| Weight | 11.8 LB |
