Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Mounting Hole Size | 0.54 in |
| RPM [Min] | 152 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Seal Options | Standard |
| Brake Type | Hydraulic |
| Displacement | 370 cm3/Rev |
| Flow Rate | 57 lpm |
| Duty | Standard-Duty |
| Manifold Options Code | 0 |
| Rotation | Standard Rotation |
| Paint/Packaging | Nickel Plate Entire Motor, Individual Box |
| Seal Options Code | 00 |
| Paint | Nickel Plate Entire Motor |
| Flow [Max] | 15 gal/min |
| Geroter/Geroler Options Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Pressure [Max] | 1250 psi |
| Viscosity Recommendation | 100 Saybold Universal Second |
| RPM [Max] | 152 rpm |
| Case Drain Code | 0 |
| Mount Type | 2 Bolt |
| Port Code | AB |
| Bolt Circle Dia. | 4.19 in |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 22.6 |
| Case Drain | None |
| Port Type | NPTF |
| Output Shaft Type | Straight |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Series | H Series |
| Output Shaft Code | 01 |
| Speed Sensor Options Code | 0 |
| Torque | 407 Nm |
| Front Seal Kit If Available | 60540-000 |
| Motor Type | Spool Valve |
| Mounting Type Code | AA |
| Special Features Assembly Code | 0 |
| Recommended System Working Temperature [Max] | 180 °F |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Port Location | Side Port |
| Intermittent Pressure [Max] | 103 bar |
| Recommended System Working Temperature [Min] | -30 °F |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Options Code | 0 |
| Paint Code | Y |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Design Code | 9 |
| Motor Element | Gerotor |
| Port Size | 1/2-14 |
| Seal Material | Buna-N |
| Weight | 14.7 LB |
