Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Straight Output Shaft
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 3292.48 in lb |
| Corrosion Resistant | No |
| Pressure [Max] | 1700 psi |
| Splines | 0 |
| Bolt Circle Dia. | 4.19 in |
| Duty | Standard-Duty |
| Intermittent Pressure [Max] | 374 bar |
| Material | Cast Iron |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Mounting Type Code | REF! |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mount Type | 2 Bolt |
| RPM [Min] | 224 rpm |
| Flow [Max] | 15 gal/min |
| Paint | Primer Low Gloss Black |
| Flow Rate | 57 lpm |
| Special Features Assembly Code | 0 |
| Port Type | Manifold, O-Ring |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 253 rpm @ 15 gal/min |
| Paint Code | A |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Displacement | 224 cm3/Rev |
| Case Drain | None |
| RPM [Max] | 253 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Series | S Series |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Mounting Hole Size | 0.54 in |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 13.7 |
| Port Code | C |
| Torque | 372 Nm |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Weight | 29.0 LB |
