These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Surge Suppressor/Damper Code
None
Port T Code
7
Response Type
Standard Response
Coil Type
DIN 43650
Overrides
No Overrides
Solenoid Code
H
Manual Override Option Code
None
Solenoid
Single
Port Restrictor Plug Code
None
Design No.
60
Reducer Module
N/A
Coil Type Code
U
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Pilot/Drain
None
Electrical Connector Code
None
Spool Spring Arrangement Code
B
Center Position
All Ports Open
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
EN Code
None
Spool Shift Timing
N/A
Solenoid Energization Code
None
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Function Code
0
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Function
2-Position Spring Offset, End to Center
Voltage & Frequency
24 VDC
Crossover
All Ports Open
Electrical Connection
DIN 43650
Electrical Options
None
Mechanical Options
None
Spool Code
0
AC/DC
DC
Indicator Lights
No
Coil Rating Code
H
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Valve Type
High-Performance
Housing Code
None
Weight
19.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
