These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Response Type
Standard Response
Solenoid Energization Code
None
Port Restrictor Plugs
None
Function Code
2
Valve Type
High-Performance
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Manual Override Option Code
None
Spool Indicator Switch Code
None
Coil Type
DIN 43650
Center Position
All Ports Blocked
Electrical Options
None
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Port Restrictor Plug Code
None
Coil Rating Code
B
Mechanical Options
None
AC/DC
AC
Spool Spring Arrangement Code
B
Pilot Valve Type
N/A
Electrical Connection
DIN 43650
Port T Pressure Rating
3000 psi
Function
2-Position Spring Offset, End to Center
Pilot/Drain
None
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Coil Type Code
U
Crossover
All Ports Blocked
Design No.
60
Electrical Connector Code
None
Solenoid Code
B
Actuator Type
Solenoid
NFPA Size
D03
Voltage & Frequency
110/120 VAC – 50/60 Hz
Rated Flow [Max]
21 gal/min
Port T Code
6
Housing Code
None
Solenoid
Single
EN Code
None
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Indicator Lights
No
Seal Material
Buna-N
Cycle Rate [Max]
N/A
Spool Code
2
Reducer Module
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
