These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
2-Position Spring Offset, End to End
Function Code
2
Electrical Options
None
Crossover
All Ports Blocked
Spool Code
2
EN Code
None
Pilot/Drain
None
Housing Code
None
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Operation
Solenoid Operated
Solenoid Code
H
Coil Type Code
U
Port T Code
7
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
AL
Spool Indicator Switch Code
None
Voltage & Frequency
24 VDC
Coil Rating Code
H
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
AC/DC
DC
Center Position
All Ports Blocked
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Electrical Connection
DIN 43650
NFPA Size
D03
Port Restrictor Plug Code
None
Coil Type
DIN 43650
Pressure [Max]
5075 psi
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Solenoid
Single
Response Type
Standard Response
Indicator Lights
No
Port Restrictor Plugs
None
Design No.
60
Electrical Connector Code
None
Manual Override Option Code
None
Mechanical Options
None
Valve Type
High-Performance
Reducer Module
N/A
Spool Shift Timing
N/A
Weight
0.982 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
