868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Actuation Option	Proportional
Leakage	Standard
Valve Mount Type	Subplate/Manifold Mounted
Interface	D05
Port Drained Into, Dual	N/A
Seal Material	Buna-N
Performance	Standard Performance
Gage Port	SAE-4
Pressure [Max]	4500 psi
Temperature Range [Min]	32 °F
Gauge Port Thread Type	SAE
Family Name	Vickers D05 SystemStak™ Valves
Port Drained Into	Tank Port
Temperature Range [Max]	176 °F
Model No.	DGMC-5-PT-AW-S-30
External Drain, Dual	N/A
Pressure Adjustment Range (psi)	60 to 725
Remote Control Port	No
Adjustment	Yes
Valve Type	Relief Valve "P" to "T"
Operating Pressure [Max]	4500 psi
Flow [Max]	32 gal/min
Body Material	Cast Iron
Adjustment Type	Screw
Pressure Limited In	Pressure Port
No. of Stages	Single Stage
Relief Function	Single
Fluid Cleanliness	20/18/15 micron
External Drain	No
Pressure Limited In, Dual	N/A
Adjustment Type, Dual	N/A
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Compatible Fluids	Petroleum Oil
Design No.	30
Pressure Adjustment Range, Dual (psi)	N/A
Weight	6.5 LB