Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 24 Tooth
- 3/8 in Belt Width
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- No lubrication required
- Minimum backlash
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Length Through Bore | 0.88 in |
| Bore Type | Rough Bore |
| Hub Projection | 0.35 in |
| Finished Bore | N/A |
| Bore Range [Max] | 0.6875 in |
| Hub Dia. | 1.06 in |
| Belt Pitch | 1/5 in |
| Belt Size | XL |
| Type | DF-1 |
| Bushing Type | None |
| Bore Range [Min] | 0.25 in |
| Belt Width | 3/8 in |
| Pitch Diameter | 1.528 in |
| No. of Teeth | 24 |
| Bushing Series | N/A |
| Weight | 0.35 LB |
| EAN or UPC | 782475087808 |
