Find a Service Center
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 16 Tooth
- 1 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Outside Dia. | 2.492 in |
| Bore Range [Min] | 0.5 in |
| Belt Size | H |
| Length Through Bore | 0.88 in |
| Bore Type | Bushed Bore |
| Bushing Type | Taper-Lock |
| Hub Projection | 0.06 in |
| Pitch Diameter | 2.546 in |
| Belt Width | 1 in |
| Type | KF-1 |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| No. of Teeth | 16 |
| Bore Range [Max] | 1.125 in |
| Bushing Series | 1108 |
| Hub Dia. | N/A |
| Weight | 1.0 LB |
| EAN or UPC | 782475576319 |
