Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 20 Tooth
- 1 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Type | KF-1 |
| Bore Type | Bushed Bore |
| Outside Dia. | 3.129 in |
| No. of Teeth | 20 |
| Pitch Diameter | 3.183 in |
| Bore Range [Max] | 1.25 in |
| Finished Bore | N/A |
| Hub Dia. | N/A |
| Belt Size | H |
| Belt Width | 1 in |
| Length Through Bore | 1 in |
| Hub Projection | 0.11 in |
| Belt Pitch | 1/2 in |
| Bushing Type | Taper-Lock |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 1210 |
| Weight | 1.62 LB |
| EAN or UPC | 782475088362 |
