Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 20 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Flange O.D. | 3.415 in |
| Bushing Series | 1210 |
| Material External Use | Steel |
| Material | Steel |
| Bushing Bore Size [Max] | 1.26 in |
| Type | KF-1 |
| Bore Size [Min] | 0.5 in |
| Width Across Teeth | 1.063 in |
| Teeth Face Width | 1.313 in |
| Belt Pitch | 1/2 in |
| Bushing Type | Taper-Lock |
| Belt Size | H |
| Bore Size [Max] | 1.26 in |
| Construction Internal | Solid |
| Bushing Bore Size [Min] | 0.5 in |
| No. of Teeth | 20 |
| Finished Bore | N/A |
| Material Internal Use | Atomized Metals |
| Hub Projection | 0.312 in |
| Bore Range [Max] | 1.25 in |
| Belt Width | 1 in |
| Outside Dia. | 3.129 in |
| Bore Type | Bushed |
| Pitch Dia. | 3.183 in |
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 1 in |
| Pitch Diameter | 3.183 in |
| Hub Type | A |
| Weight | 1.7 LB |
| EAN or UPC | 697950083230 |
