Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 20 Tooth
- 1 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Finished Bore | N/A |
| Bore Range [Max] | 1.25 in |
| Bushing Type | Taper-Lock |
| Belt Width | 1 in |
| Bushing Series | 1210 |
| Bore Type | Bushed Bore |
| Belt Size | H |
| Hub Projection | 0.11 in |
| Pitch Diameter | 3.183 in |
| Bore Range [Min] | 0.5 in |
| Type | KF-1 |
| Belt Pitch | 1/2 in |
| Length Through Bore | 1 in |
| Outside Dia. | 3.129 in |
| Hub Dia. | N/A |
| No. of Teeth | 20 |
| Weight | 1.62 LB |
| EAN or UPC | 782475088362 |
