Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 24 Tooth
- 2 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Size | H |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2012 |
| Finished Bore | N/A |
| Pitch Diameter | 3.82 in |
| Bore Range [Max] | 2 in |
| Hub Dia. | 0 in |
| Type | KF-1 |
| Bushing Type | Taper-Lock |
| Length Through Bore | 1.25 in |
| No. of Teeth | 24 |
| Belt Pitch | 1/2 in |
| Belt Width | 2 in |
| Outside Dia. | 3.766 in |
| Bore Type | Bushed Bore |
| Hub Projection | 0.55 in |
| Weight | 2.87 LB |
| EAN or UPC | 782475088638 |
