Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 24 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 24 |
| Hub Projection | 0.546 in |
| Length Through Bore | 1.25 in |
| Bore Size [Min] | 0.5 in |
| Pitch Dia. | 3.82 in |
| Bore Range [Max] | 2 in |
| Belt Pitch | 1/2 in |
| Bushing Type | Taper-Lock |
| Material External Use | Steel |
| Pitch Diameter | 3.82 in |
| Hub Type | A |
| Bore Type | Bushed |
| Bore Size [Max] | 2 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 2012 |
| Finished Bore | N/A |
| Material Internal Use | Atomized Metals |
| Width Across Teeth | 2.093 in |
| Type | KF-1 |
| Teeth Face Width | 2.344 in |
| Bushing Bore Size [Min] | 0.5 in |
| Material | Steel |
| Flange O.D. | 4.051 in |
| Outside Dia. | 3.766 in |
| Construction Internal | Solid |
| Belt Width | 2 in |
| Bushing Bore Size [Max] | 2 in |
| Belt Size | H |
| Weight | 2.8 LB |
| EAN or UPC | 697950083414 |
