Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 26 Tooth
- 2 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Length Through Bore | 1.25 in |
| Hub Projection | 0.55 in |
| Belt Size | H |
| Outside Dia. | 4.084 in |
| Bore Range [Max] | 2 in |
| Belt Pitch | 1/2 in |
| Pitch Diameter | 4.138 in |
| Bore Range [Min] | 0.5 in |
| Bore Type | Bushed Bore |
| Bushing Series | 2012 |
| Hub Dia. | 0 in |
| Belt Width | 2 in |
| Type | KF-1 |
| Bushing Type | Taper-Lock |
| No. of Teeth | 26 |
| Finished Bore | N/A |
| Weight | 3.73 LB |
| EAN or UPC | 782475088645 |
