Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 26 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 2012 |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Type | A |
| Bushing Type | Taper-Lock |
| Belt Pitch | 1/2 in |
| Material External Use | Steel |
| Type | KF-1 |
| Pitch Diameter | 4.138 in |
| Pitch Dia. | 4.138 in |
| Belt Width | 2 in |
| Length Through Bore | 1.797 in |
| Finished Bore | N/A |
| Teeth Face Width | 2.344 in |
| Flange O.D. | 4.369 in |
| Bore Size [Min] | 0.5 in |
| Bore Type | Bushed |
| No. of Teeth | 26 |
| Bore Size [Max] | 2 in |
| Width Across Teeth | 2.094 in |
| Belt Size | H |
| Material Internal Use | Carbon Steel |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Bushing Bore Size [Max] | 2 in |
| Construction Internal | Solid |
| Bore Range [Max] | 2 in |
| Outside Dia. | 4.084 in |
| Weight | 3.6 LB |
| EAN or UPC | 697950083506 |
