Find a Service Center
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 72 Tooth
- 1 in Belt Width
features
- Constant speed
- Nonslip
- No lubrication required
- Minimum backlash
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Width | 1 in |
| Hub Projection | 0.34 in |
| Bushing Series | 3020 |
| Hub Dia. | 6 1/4 in |
| Bushing Type | Taper-Lock |
| Belt Size | H |
| Belt Pitch | 1/2 in |
| Pitch Diameter | 11.459 in |
| Bore Range [Max] | 3 in |
| Bore Type | Bushed Bore |
| Type | C-1 |
| Finished Bore | N/A |
| Outside Dia. | 11.405 in |
| Bore Range [Min] | 0.875 in |
| No. of Teeth | 72 |
| Length Through Bore | 2 in |
| Weight | 24.52 LB |
| EAN or UPC | 782475576647 |
