Find a Service Center
Alternate Products
- 4.6" Maximum Diameter
- 4.9" Stroke Length
- 2.2" Compressed Height
- 1/8" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
applications
- Palletizers
- Labeling equipment
- Bin-tilting devices
- Conveyor systems
- Lift tables
- Roll tensioning
- Clutch and brake systems
- Textile looms
- Paper machines
- Commercial laundry machines
- Vibratory conveyors
- Electronic equipment
- Compressors
| Lower End Plate Diameter | 4.1 in |
| Recommended Isolator Design Height [Min] | 3.800 in |
| Force @ 4 in Stroke | N/A |
| End Closure | Style 2 End Retainer |
| Compressed Height | 2.2 in |
| Force @ Maximum Stroke (80 psi) | 310 lbf |
| Force @ 12 in Stroke | N/A |
| Stroke Length [Max] | 4.900 in |
| Temperature Range [Min] | -40 °F |
| Force @ 8 in Stroke | N/A |
| Air Inlet Type | NPT |
| Force @ 5 in Stroke | N/A |
| Recommended Isolator Design Height [Max] | 4.400 in |
| Force @ 9 in Stroke | N/A |
| Force @ Stroke (80 psi) | 880 lbf @ 1 in, 870 lbf @ 3 in |
| Upper End Plate Diameter | 4.1 in |
| Air Inlet | 1/8 in |
| Force @ 3 in Stroke | 830 lbf |
| Force @ 6 in Stroke | N/A |
| Pressure [Max] | 100 psi |
| Bumpers | w/o Bumpers |
| Force @ 1 in Stroke | 850 lbf |
| Temperature Range [Max] | 150 °F |
| Style No. | YI-1S |
| Force @ 2 in Stroke | 820 lbf |
| Bellows Type | Shaped Sleeve |
| Blind Tap for Mounting | 3/8-16 UNC x 0.50 Deep |
| Weight | 1.9 LB |
