Find a Service Center
- Air Power Source
- 205 Series
- 1/4 in Fluid Inlet Size
description
- Graco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
features
- Max flow rate of 3.6 gpm (14 lpm)
- High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
- Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
- Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
- Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
| Maximum Pumpable Solids Size | 0.06 in |
| Storage Temperature [Min] | 32 °F |
| Fluid Pressure [Max] | 7 bar, 100 psi |
| Cycle Rate [Max] | 375 CPM |
| Diaphragm Material | PTFE Overmolded |
| Center Section Material | Polypropylene |
| Operating Temperature [Min] | 32 °F |
| Connection Type | Threaded |
| Fluid Outlet Size | 1/4 in, 6.35 mm |
| Series | 205 |
| Air Consumption [Max] | 4.8 SCFM |
| Flow [Max] | 2.5 gal/min |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Type | NPT |
| Fluid Outlet Thread Type | NPT |
| Fluid Outlet | 1/4 in |
| Fluid Inlet Size | 1/4 in, 6.35 mm |
| Type | Pneumatic Diaphragm Pump |
| Power Source | Air |
| Compatible Material | Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink |
| Ball/Check Material | PTFE |
| Manifold Configuration | Center Port |
| Flow Rate [Max] | 2.5 gpm, 9.5 lpm |
| Seat Material | PTFE |
| Air Inlet Type | NPT |
| Solid Size [Max] | 0.06 in, 1.5 mm |
| Manifold O-Ring Material | PTFE |
| Air Inlet | 1/8 in |
| Fluid Section Material | PTFE |
| Air Inlet Thread Gender | Female |
| Ball Material | PTFE |
| Fluid Inlet Thread Type | NPT |
| Fluid Inlet | 1/4 in |
| Operating Temperature [Max] | 212 °F |
| Material | PTFE |
| Fluid Inlet Thread Gender | Female |
| Weight | 0.0 LB |
| EAN or UPC | 755652266907 |
