RC-02

Single Row Steel Needle Roller Bearing

Item #101644362

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Enclosure	Open
O.D. Type	Straight
Operating Temperature [Min]	-22 ˚F
Tolerance	Iso Class 0 (RBEC 1)
Precision Class	ABEC 1
Overall Width	0.25 in, 6.35 mm
Shaft Dia. [Max]	0.125 in
Capacity	Standard Capacity
Speed (Max) Oil	34000 rpm
No. of Rows	Single
Series	RC
Component	Assembly
Oil Hole	w/o Oil Hole
End Type	Open End
Outer Ring Width	0.25 in, 6.35 mm
Bearing Material	1014 Steel
Housing Bore [Min]	0.2812 in
Relubrication Feature	No
Origin	Roller Clutches
Radial Internal Clearance	N/A
Self Aligning	No
Lubricant	Rust Preventative
Relubricatable	No
Radial Internal Clearance Specification	N/A
Shaft Dia. [Min]	0.1247 in
Housing Bore [Max]	0.2817 in
Mounting Method	Press Fit
Precision Ground	Yes
Bore Type	Round
O.D.	0.28 in, 7.16 mm
I.D.	0.13 in, 3.2 mm
Operating Temperature [Max]	230 ˚F
Clamp Torque	2.86 lbf
Cage Material	Polymer
Housing Shoulder Diameter	0.44 in
Cage Type	Window
Bearing Design	Roller Clutch
Rolling Element	Roller
Weight	0.25 LB
EAN or UPC	605790214158