- 0.75 in Inner Diameter
- 1 in Outer Diameter
- 0.63 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Clamp Torque | 196 lbf |
| Bore Type | Round |
| O.D. Type | Straight |
| Bearing Material | 1014 Steel |
| I.D. | 0.75 in, 19.06 mm |
| Outer Ring Width | 0.63 in, 15.88 mm |
| Cage Material | Polymer |
| Self Aligning | No |
| Shaft Dia. [Min] | 0.7495 in |
| No. of Rows | Single |
| Relubrication Feature | No |
| Operating Temperature [Max] | 230 ˚F |
| Overall Width | 0.63 in, 15.88 mm |
| Operating Temperature [Min] | -22 ˚F |
| Precision Class | ABEC 1 |
| Cage Type | Window |
| Housing Bore [Min] | 0.9995 in |
| Bearing Design | Roller Clutch |
| Tolerance | Iso Class 0 (RBEC 1) |
| Origin | Roller Clutches |
| Enclosure | Open |
| Precision Ground | Yes |
| Radial Internal Clearance Specification | N/A |
| Mounting Method | Press Fit |
| Series | RC |
| Radial Internal Clearance | N/A |
| Relubricatable | No |
| Oil Hole | w/o Oil Hole |
| Lubricant | Rust Preventative |
| Housing Bore [Max] | 1.0005 in |
| Shaft Dia. [Max] | 0.75 in |
| End Type | Open End |
| O.D. | 1 in, 25.41 mm |
| Speed (Max) Oil | 12000 rpm |
| Capacity | Standard Capacity |
| Component | Assembly |
| Rolling Element | Roller |
| Housing Shoulder Diameter | 1.4 in |
| Weight | 0.005 LB |
| EAN or UPC | 605790188510 |

