Find a Service Center
- 0.75 in Inner Diameter
- 1.01 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Dynamic Load Rating | 8.9 kN |
| Oil Hole | w/o Oil Hole |
| Clamp Torque | 196 lbf |
| Series | RCB |
| Component | Assembly |
| O.D. Type | Straight |
| I.D. | 0.75 in, 19.05 mm |
| Precision Ground | Yes |
| End Type | Open End |
| Bearing Design | Roller Clutch |
| No. of Rows | Single |
| Radial Internal Clearance Specification | N/A |
| Cage Type | Window |
| Housing Bore [Min] | 0.9995 in |
| Capacity | Standard Capacity |
| Relubricatable | No |
| Operating Temperature [Max] | 230 ˚F |
| Self Aligning | No |
| Radial Internal Clearance | N/A |
| Lubricant | Rust Preventative |
| Relubrication Feature | No |
| Mounting Method | Press Fit |
| Origin | Roller Clutches |
| Working Load | 1030 lbf |
| Overall Width | 1 in, 25.4 mm |
| Bearing Material | 1014 Steel |
| Enclosure | Open |
| O.D. | 1.01 in, 25.53 mm |
| Housing Shoulder Diameter | 1.4 in |
| Outer Ring Width | 1 in, 25.4 mm |
| Bore Type | Round |
| Operating Temperature [Min] | -22 ˚F |
| Shaft Dia. [Max] | 0.75 in |
| Static Load Rating | 9.79 kN |
| Cage Material | Polymer |
| Precision Class | ABEC 1 |
| Speed (Max) Oil | 12000 rpm |
| Rolling Element | Roller |
| Tolerance | Iso Class 0 (RBEC 1) |
| Housing Bore [Max] | 1.0005 in |
| Shaft Dia. [Min] | 0.7495 in |
| Weight | 0.007 LB |
| EAN or UPC | 605790188534 |
