Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 10 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Screws | 1 |
| No. of Teeth | 10 |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size [Max] | 0.563 in |
| Belt Size | L |
| Flange O.D. | 1.422 in |
| Bushing Bore Size [Min] | 0.375 in |
| Length Through Bore | 1.125 in |
| Bushing Bore Size [Max] | 0.563 in |
| Type | DF-1 |
| Bore Range [Min] | 0.375 in |
| Hub Dia. | 0.812 in |
| Hub Type | B |
| Bore Range [Max] | 0.562 in |
| Pitch Dia. | 1.194 in |
| Material Internal Use | Atomized Metals |
| Bushing Series | N/A |
| Belt Pitch | 3/8 in |
| Set Screw Size | 10-24 x 3/16 |
| Bushing Type | None |
| Outside Dia. | 1.166 in |
| Bore Type | Rough Bore |
| Material | Steel |
| Pitch Diameter | 1.194 in |
| Finished Bore | N/A |
| Hub Projection | 0.313 in |
| Belt Width | 0.5 in |
| Construction Internal | Solid |
| Teeth Face Width | 0.75 in |
| Material External Use | Steel |
| Bore Size [Min] | 0.375 in |
| Weight | 0.22 LB |
| EAN or UPC | 697950088242 |
