Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 12 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
| Construction Internal | Solid |
| Bore Size [Max] | 0.813 in |
| Bushing Type | None |
| Belt Size | L |
| Hardened Teeth | Without Hardened Teeth |
| Belt Width | 0.5 in |
| Material Internal Use | Atomized Metals |
| Set Screw Size | 10-24 x 3/16 |
| Bore Size [Min] | 0.375 in |
| Length Through Bore | 1 1/4 in |
| Hub Dia. | 1.062 in |
| Outside Dia. | 1.4020 in |
| Belt Pitch | 3/8 in |
| Hub Type | B |
| Flange O.D. | 1.66 in |
| No. of Screws | 1 |
| No. of Teeth | 12 |
| Bore Range [Min] | 3/8 in |
| Bushing Bore Size [Min] | 0.375 in |
| Bore Type | Rough Bore |
| Pitch Diameter | 1.432 in |
| Pitch Dia. | 1.432 in |
| Material | Steel |
| Teeth Face Width | 0.75 in |
| Hub Projection | 0.438 in |
| Type | DF-1 |
| Bushing Bore Size [Max] | 0.813 in |
| Material External Use | Steel |
| Bore Range [Max] | 13/16 in |
| Finished Bore | N/A |
| Bushing Series | N/A |
| Weight | 0.3 LB |
| EAN or UPC | 697950093499 |
