Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 14 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
| Bushing Type | None |
| No. of Teeth | 14 |
| Hub Dia. | 1 1/8 in |
| Material | Steel |
| Hub Type | B |
| Finished Bore | N/A |
| Flange O.D. | 1.899 in |
| Pitch Dia. | 1.671 in |
| Length Through Bore | 1 1/4 in |
| Belt Pitch | 3/8 in |
| Belt Width | 0.5 in |
| Bore Range [Min] | 3/8 in |
| Bushing Bore Size [Max] | 0.875 in |
| Bushing Series | N/A |
| Construction Internal | Solid |
| Bore Range [Max] | 7/8 in |
| Bore Size [Max] | 0.875 in |
| Bore Size [Min] | 0.375 in |
| No. of Screws | 1 |
| Outside Dia. | 1.6410 in |
| Material Internal Use | Atomized Metals |
| Teeth Face Width | 0.75 in |
| Hardened Teeth | Without Hardened Teeth |
| Pitch Diameter | 1.671 in |
| Type | DF-1 |
| Bushing Bore Size [Min] | 0.375 in |
| Belt Size | L |
| Bore Type | Rough Bore |
| Hub Projection | 1/2 in |
| Set Screw Size | 10-24 x 3/16 |
| Material External Use | Steel |
| Weight | 0.4 LB |
| EAN or UPC | 697950097916 |
