Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 14 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1.75 in |
| Outside Dia. | 1.641 in |
| Material External Use | Steel |
| Pitch Dia. | 1.671 in |
| Material | Steel |
| Bushing Series | N/A |
| Bore Range [Max] | 0.875 in |
| No. of Screws | 1 |
| Bore Type | Rough Bore |
| Bushing Bore Size [Min] | 0.375 in |
| Bore Range [Min] | 0.375 in |
| Belt Size | L |
| Hub Type | B |
| Type | DF-1 |
| Bore Size [Min] | 0.375 in |
| Bushing Type | None |
| Construction Internal | Solid |
| Belt Pitch | 3/8 in |
| Hardened Teeth | Without Hardened Teeth |
| Teeth Face Width | 1.25 in |
| Hub Dia. | 1 1/8 in |
| Bushing Bore Size [Max] | 0.875 in |
| No. of Teeth | 14 |
| Belt Width | 1 in |
| Hub Projection | 1/2 in |
| Set Screw Size | 10-24 x 3/16 |
| Material Internal Use | Atomized Metals |
| Flange O.D. | 1.899 in |
| Bore Size [Max] | 0.875 in |
| Pitch Diameter | 1.671 in |
| Finished Bore | N/A |
| Weight | 1.0 LB |
| EAN or UPC | 697950097930 |
