Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 14 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Max] | 0.875 in |
| No. of Teeth | 14 |
| Bore Type | Rough Bore |
| Bore Range [Max] | 0.875 in |
| Hub Projection | 1/2 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Type | B |
| Set Screw Size | 10-24 x 3/16 |
| No. of Screws | 1 |
| Bushing Bore Size [Max] | 0.875 in |
| Flange O.D. | 1.899 in |
| Bore Range [Min] | 0.375 in |
| Bushing Bore Size [Min] | 0.375 in |
| Material | Steel |
| Material External Use | Steel |
| Teeth Face Width | 1.25 in |
| Belt Size | L |
| Pitch Dia. | 1.671 in |
| Length Through Bore | 1.75 in |
| Pitch Diameter | 1.671 in |
| Bore Size [Min] | 0.375 in |
| Hub Dia. | 1 1/8 in |
| Finished Bore | N/A |
| Type | DF-1 |
| Belt Pitch | 3/8 in |
| Belt Width | 1 in |
| Material Internal Use | Atomized Metals |
| Construction Internal | Solid |
| Bushing Series | N/A |
| Outside Dia. | 1.641 in |
| Bushing Type | None |
| Weight | 1.0 LB |
| EAN or UPC | 697950097930 |
