Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/5 in Belt Pitch
- XL Belt Size
- 15 Tooth
- 1/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | XL |
| Bore Size [Max] | 0.438 in |
| Outside Dia. | 0.93 in |
| Hub Projection | 0.218 in |
| Material | Steel |
| Hub Dia. | 5/8 in |
| Bore Type | Rough Bore |
| Bushing Bore Size [Max] | 0.438 in |
| Finished Bore | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Flange O.D. | 1.184 in |
| Material Internal Use | Atomized Metals |
| Type | DF-1 |
| Bore Range [Max] | 0.437 in |
| Pitch Diameter | 0.955 in |
| Bore Range [Min] | 0.25 in |
| Bushing Type | None |
| Belt Pitch | 1/5 in |
| Teeth Face Width | 0.563 in |
| Construction Internal | Solid |
| Pitch Dia. | 0.955 in |
| Material External Use | Steel |
| Hub Type | B |
| No. of Screws | 2 |
| Set Screw Size | 8-32 x 1/8 |
| Bushing Bore Size [Min] | 0.25 in |
| No. of Teeth | 15 |
| Length Through Bore | 0.781 in |
| Belt Width | 0.375 in |
| Bushing Series | N/A |
| Bore Size [Min] | 0.25 in |
| Weight | 0.09 LB |
| EAN or UPC | 697950099507 |
