Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 16 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| No. of Teeth | 16 |
| Pitch Diameter | 1.91 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size [Max] | 1.125 in |
| Type | DF-1 |
| Bore Range [Min] | 0.5 in |
| Hub Type | B |
| Belt Pitch | 3/8 in |
| Hub Dia. | 1.437 in |
| Belt Width | 0.5 in |
| Bushing Series | N/A |
| Teeth Face Width | 0.75 in |
| Bushing Bore Size [Max] | 1.125 in |
| Material External Use | Steel |
| Hub Projection | 5/8 in |
| Belt Size | L |
| Outside Dia. | 1.88 in |
| Bore Size [Min] | 0.5 in |
| Bushing Bore Size [Min] | 0.5 in |
| No. of Screws | 1 |
| Construction Internal | Solid |
| Finished Bore | N/A |
| Bushing Type | None |
| Flange O.D. | 2.155 in |
| Length Through Bore | 1.375 in |
| Set Screw Size | 1/4-20 x 1/4 |
| Bore Range [Max] | 1.125 in |
| Pitch Dia. | 1.91 in |
| Bore Type | Rough Bore |
| Material Internal Use | Atomized Metals |
| Weight | 0.6 LB |
| EAN or UPC | 697950101002 |
