Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 16 Tooth
- 3/4 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Min] | 0.5 in |
| Hub Projection | 5/8 in |
| Finished Bore | N/A |
| Type | DF-1 |
| Bushing Series | N/A |
| Material Internal Use | Atomized Metals |
| Hub Dia. | 1.437 in |
| Bushing Type | None |
| Bore Range [Max] | 1.125 in |
| Set Screw Size | 1/4-20 x 1/4 |
| Bore Size [Max] | 1.125 in |
| Teeth Face Width | 1 in |
| Outside Dia. | 1.88 in |
| Belt Size | L |
| Bore Range [Min] | 0.5 in |
| No. of Screws | 1 |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Bore Size [Max] | 1.125 in |
| Material | Steel |
| Belt Width | 0.75 in |
| Material External Use | Steel |
| Flange O.D. | 2.155 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Type | B |
| Belt Pitch | 3/8 in |
| Bore Type | Rough Bore |
| No. of Teeth | 16 |
| Pitch Diameter | 1.91 in |
| Construction Internal | Solid |
| Length Through Bore | 1.625 in |
| Pitch Dia. | 1.91 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950101019 |
